Losing material design after showing report

Stimulsoft Reports.WPF discussion
Post Reply
Irena
Posts: 9
Joined: Wed Feb 19, 2020 7:21 am

Losing material design after showing report

Post by Irena »

Hello,

In my .NET Core 3.0 WPF application I have installed the following nugets:

https://www.nuget.org/packages/Material ... c=template
https://www.nuget.org/packages/Material ... c=template
https://www.nuget.org/packages/Stimulso ... c=template
https://www.nuget.org/packages/Stimulso ... c=template

The problem I encountered is losing material design of existing WPF components after showing Stimulsoft report.

Before showing report:
https://prnt.sc/r4z2vo
Image

After showing report:
https://prnt.sc/r4z34u
Image

Can you please take a look at the project https://drive.google.com/open?id=1ENHkJ ... PnvvO8JUzv

Thanks in advance for your support.
Last edited by Irena on Thu Feb 20, 2020 7:05 am, edited 1 time in total.
Andrew
Posts: 4104
Joined: Fri Jun 09, 2006 3:58 am

Re: Losing material design after showing report

Post by Andrew »

Hello,

Your images are missed, please upload them once again.

Waiting... :)
Irena
Posts: 9
Joined: Wed Feb 19, 2020 7:21 am

Re: Losing material design after showing report

Post by Irena »

I have edited original post.
HighAley
Posts: 8430
Joined: Wed Jun 08, 2011 7:40 am
Location: Stimulsoft Office

Re: Losing material design after showing report

Post by HighAley »

Hello.

We have made an improvement.
Please, use check our next build.

Thank you.
Irena
Posts: 9
Joined: Wed Feb 19, 2020 7:21 am

Re: Losing material design after showing report

Post by Irena »

Thank you for support. I'll try it as soon as the new release comes out.
Andrew
Posts: 4104
Joined: Fri Jun 09, 2006 3:58 am

Re: Losing material design after showing report

Post by Andrew »

Hello,

Yes, we are going to release it in March.

Thank you.
Post Reply