Didn't load all report data once we use manual relationship

Stimulsoft Reports.JS discussion
DanielHewett
Posts: 18
Joined: Wed Jun 30, 2021 4:52 am

Re: Didn't load all report data once we use manual relationship

Post by DanielHewett »

Hi,

Attached is a project where it is possible to reproduce the issue.

Thanks

Daniel
Alias_Example_Mapping.zip
(1.65 KiB) Downloaded 100 times
Lech Kulikowski
Posts: 6196
Joined: Tue Mar 20, 2018 5:34 am

Re: Didn't load all report data once we use manual relationship

Post by Lech Kulikowski »

Hello,

We couldn't reproduce the issue.

Thank you.
Attachments
Screenshot 2021-10-25 215042.png
Screenshot 2021-10-25 215042.png (401.46 KiB) Viewed 950 times
DanielHewett
Posts: 18
Joined: Wed Jun 30, 2021 4:52 am

Re: Didn't load all report data once we use manual relationship

Post by DanielHewett »

Hi thanks for the reply,

On initial load of the project supplied the issue still exists. However, if we unselect and reselect the "Use Aliases" checkbox, the Aliases are all used correctly.

You have given us previous assistance with configuring the designer to make sure Aliases are used on initial load and this is what we are currently using. Is there something further we can do to force this particular alias to be also used on initial load?

Thanks

Daniel
Lech Kulikowski
Posts: 6196
Joined: Tue Mar 20, 2018 5:34 am

Re: Didn't load all report data once we use manual relationship

Post by Lech Kulikowski »

Hello,

We have checked your project on several web servers and couldn't reproduce the issue.

Please try to clean cache, check version, etc.

Thank you.
DanielHewett
Posts: 18
Joined: Wed Jun 30, 2021 4:52 am

Re: Didn't load all report data once we use manual relationship

Post by DanielHewett »

Hi,

Thanks for the reply.

We have done some further testing and think we have come up with the specific scenario that causes the issue.

Not knowing how your control exactly works, it appears that the control is able to remember if the user manually set or unset the "Use Aliases" checkbox.

On a browser that has never used a Stimulsoft control or, the "Use Aliases" checkbox was last manually unchecked, the issue will be reproduced.

If, however, the checkbox was last manually set as checked, even if the browser is closed and the project reopened or the page refreshed, the issue does not appear.

Thanks

Daniel
Lech Kulikowski
Posts: 6196
Joined: Tue Mar 20, 2018 5:34 am

Re: Didn't load all report data once we use manual relationship

Post by Lech Kulikowski »

Hello,

You are welcome.
DanielHewett
Posts: 18
Joined: Wed Jun 30, 2021 4:52 am

Re: Didn't load all report data once we use manual relationship

Post by DanielHewett »

Hi,

I think there might have been some confusion regarding my last reply.

I am trying to highlight that I think there is still an issue with the alias. The scenario occurs when in code there is an attempt to force the use of aliases, but, in the interface, the "Use Aliases" checkbox was previously unchecked. This is a scenario our clients will face as by default the checkbox is unchecked.

I can record a video to show the steps to reproduce if required.

Thanks

Daniel
Lech Kulikowski
Posts: 6196
Joined: Tue Mar 20, 2018 5:34 am

Re: Didn't load all report data once we use manual relationship

Post by Lech Kulikowski »

Hello,

Ok. Please send us a step-by-step guide on how to reproduce the issue.

Thank you.
DanielHewett
Posts: 18
Joined: Wed Jun 30, 2021 4:52 am

Re: Didn't load all report data once we use manual relationship

Post by DanielHewett »

Hi,

Attached is a video where I demonstrate how to reproduce the issue using the demo app that I have previously supplied.

Thanks

Dan
Stimulsoft Alias Issue.mp4
(5.72 MiB) Downloaded 104 times
Lech Kulikowski
Posts: 6196
Joined: Tue Mar 20, 2018 5:34 am

Re: Didn't load all report data once we use manual relationship

Post by Lech Kulikowski »

Hello,

We couldn't reproduce the issue.
Could you check your issue on other pc, browser, etc.

Thank you.
Post Reply