Didn't load all report data once we use manual relationship
-
- Posts: 18
- Joined: Wed Jun 30, 2021 4:52 am
Re: Didn't load all report data once we use manual relationship
Hi,
Attached is a project where it is possible to reproduce the issue.
Thanks
Daniel
Attached is a project where it is possible to reproduce the issue.
Thanks
Daniel
-
- Posts: 6364
- Joined: Tue Mar 20, 2018 5:34 am
Re: Didn't load all report data once we use manual relationship
Hello,
We couldn't reproduce the issue.
Thank you.
We couldn't reproduce the issue.
Thank you.
- Attachments
-
- Screenshot 2021-10-25 215042.png (401.46 KiB) Viewed 2199 times
-
- Posts: 18
- Joined: Wed Jun 30, 2021 4:52 am
Re: Didn't load all report data once we use manual relationship
Hi thanks for the reply,
On initial load of the project supplied the issue still exists. However, if we unselect and reselect the "Use Aliases" checkbox, the Aliases are all used correctly.
You have given us previous assistance with configuring the designer to make sure Aliases are used on initial load and this is what we are currently using. Is there something further we can do to force this particular alias to be also used on initial load?
Thanks
Daniel
On initial load of the project supplied the issue still exists. However, if we unselect and reselect the "Use Aliases" checkbox, the Aliases are all used correctly.
You have given us previous assistance with configuring the designer to make sure Aliases are used on initial load and this is what we are currently using. Is there something further we can do to force this particular alias to be also used on initial load?
Thanks
Daniel
-
- Posts: 6364
- Joined: Tue Mar 20, 2018 5:34 am
Re: Didn't load all report data once we use manual relationship
Hello,
We have checked your project on several web servers and couldn't reproduce the issue.
Please try to clean cache, check version, etc.
Thank you.
We have checked your project on several web servers and couldn't reproduce the issue.
Please try to clean cache, check version, etc.
Thank you.
-
- Posts: 18
- Joined: Wed Jun 30, 2021 4:52 am
Re: Didn't load all report data once we use manual relationship
Hi,
Thanks for the reply.
We have done some further testing and think we have come up with the specific scenario that causes the issue.
Not knowing how your control exactly works, it appears that the control is able to remember if the user manually set or unset the "Use Aliases" checkbox.
On a browser that has never used a Stimulsoft control or, the "Use Aliases" checkbox was last manually unchecked, the issue will be reproduced.
If, however, the checkbox was last manually set as checked, even if the browser is closed and the project reopened or the page refreshed, the issue does not appear.
Thanks
Daniel
Thanks for the reply.
We have done some further testing and think we have come up with the specific scenario that causes the issue.
Not knowing how your control exactly works, it appears that the control is able to remember if the user manually set or unset the "Use Aliases" checkbox.
On a browser that has never used a Stimulsoft control or, the "Use Aliases" checkbox was last manually unchecked, the issue will be reproduced.
If, however, the checkbox was last manually set as checked, even if the browser is closed and the project reopened or the page refreshed, the issue does not appear.
Thanks
Daniel
-
- Posts: 6364
- Joined: Tue Mar 20, 2018 5:34 am
Re: Didn't load all report data once we use manual relationship
Hello,
You are welcome.
You are welcome.
-
- Posts: 18
- Joined: Wed Jun 30, 2021 4:52 am
Re: Didn't load all report data once we use manual relationship
Hi,
I think there might have been some confusion regarding my last reply.
I am trying to highlight that I think there is still an issue with the alias. The scenario occurs when in code there is an attempt to force the use of aliases, but, in the interface, the "Use Aliases" checkbox was previously unchecked. This is a scenario our clients will face as by default the checkbox is unchecked.
I can record a video to show the steps to reproduce if required.
Thanks
Daniel
I think there might have been some confusion regarding my last reply.
I am trying to highlight that I think there is still an issue with the alias. The scenario occurs when in code there is an attempt to force the use of aliases, but, in the interface, the "Use Aliases" checkbox was previously unchecked. This is a scenario our clients will face as by default the checkbox is unchecked.
I can record a video to show the steps to reproduce if required.
Thanks
Daniel
-
- Posts: 6364
- Joined: Tue Mar 20, 2018 5:34 am
Re: Didn't load all report data once we use manual relationship
Hello,
Ok. Please send us a step-by-step guide on how to reproduce the issue.
Thank you.
Ok. Please send us a step-by-step guide on how to reproduce the issue.
Thank you.
-
- Posts: 18
- Joined: Wed Jun 30, 2021 4:52 am
Re: Didn't load all report data once we use manual relationship
Hi,
Attached is a video where I demonstrate how to reproduce the issue using the demo app that I have previously supplied.
Thanks
Dan
Attached is a video where I demonstrate how to reproduce the issue using the demo app that I have previously supplied.
Thanks
Dan
-
- Posts: 6364
- Joined: Tue Mar 20, 2018 5:34 am
Re: Didn't load all report data once we use manual relationship
Hello,
We couldn't reproduce the issue.
Could you check your issue on other pc, browser, etc.
Thank you.
We couldn't reproduce the issue.
Could you check your issue on other pc, browser, etc.
Thank you.