Carriage Return in Tool Tip

Stimulsoft Dashboards.WEB discussion
Post Reply
brett.macpherson
Posts: 28
Joined: Mon Apr 13, 2020 7:29 am

Carriage Return in Tool Tip

Post by brett.macpherson » Mon Aug 16, 2021 8:18 am

Hi,
i have several dashboards which end up with several items condensed into the "series" expression of a chart. The main reason i put them here is to allow them to be shown on the tooltip as it appears as though only items associated with the chart are available to be shown on the tool top. However when you then look at the tooltip it is a long single line and i would like to be able to put carriage returns into it. I've tried putting "\r\n" into the series but it doesn't do anything. The tool tip is set to display. The tool tip is set to custom and display {Series} which it is doing, but i can't get it to create a new line when i want. Is this possible? or is there another way to show informaiton from the same dataset on the tooltip which may not be directly used on the chart?
Attachments
Capture1.PNG
Capture1.PNG (12.58 KiB) Viewed 1768 times
Lech Kulikowski
Posts: 4055
Joined: Tue Mar 20, 2018 5:34 am

Re: Carriage Return in Tool Tip

Post by Lech Kulikowski » Tue Aug 17, 2021 8:09 am

Hello,

Sorry, maybe we did not exactly understand your question. Could you explain your issue in more detail?

Thank you.
brett.macpherson
Posts: 28
Joined: Mon Apr 13, 2020 7:29 am

Re: Carriage Return in Tool Tip

Post by brett.macpherson » Tue Aug 17, 2021 12:07 pm

it didn't add the other picture.
So you see in the screen shot the tooltip ends up being quite long when set to display {Series}. I was wanting to insert a carriage return in the resulted tooltip that comes from this tooltip.
Capture2.PNG
Capture2.PNG (10.23 KiB) Viewed 1747 times
Lech Kulikowski
Posts: 4055
Joined: Tue Mar 20, 2018 5:34 am

Re: Carriage Return in Tool Tip

Post by Lech Kulikowski » Wed Aug 18, 2021 8:03 pm

Hello,

We couldn't reproduce the issue.

Thank you.
Attachments
Screenshot 2021-08-18 220325.png
Screenshot 2021-08-18 220325.png (21.99 KiB) Viewed 1741 times
Screenshot 2021-08-18 220302.png
Screenshot 2021-08-18 220302.png (222.54 KiB) Viewed 1741 times
brett.macpherson
Posts: 28
Joined: Mon Apr 13, 2020 7:29 am

Re: Carriage Return in Tool Tip

Post by brett.macpherson » Fri Sep 17, 2021 1:46 am

Hi Lech,
sorry for the delay getting back to this. I was able to recreate this quite easily on your demo website. It's not a variable i'm trying to show on the tool tip, it's the series name. Which has a carriage return in it.
CarriageReturn2.PNG
CarriageReturn2.PNG (20.2 KiB) Viewed 1657 times
CarriageReturn1.PNG
CarriageReturn1.PNG (97.17 KiB) Viewed 1657 times
Lech Kulikowski
Posts: 4055
Joined: Tue Mar 20, 2018 5:34 am

Re: Carriage Return in Tool Tip

Post by Lech Kulikowski » Mon Sep 20, 2021 8:48 am

Hello,

Unfortunately, at the current moment, in the Web versions, it is not supported.
We have added the task in our to-do list.

Thank you.
Post Reply