Piecharts are cut off at the bottom

Stimulsoft Dashboards.WEB discussion
Post Reply
Ralf40670
Posts: 32
Joined: Wed Jul 17, 2019 5:08 pm

Piecharts are cut off at the bottom

Post by Ralf40670 » Fri Jul 19, 2019 5:02 pm

Hello,

I have created a dashboard which comprises of 1 doughnut and 4 piecharts.
The dashboard is formatted correctly when published for winforms - see screenshot PiechartsCutOff_01.jpg.
When published for the web, the dougnut and the piecharts are cut off at the lower end.
The problem disappears under windows 10 when the scaling is set to 125 %.
Any help would be appreciated.
Regards
Ralf
Attachments
PiechartsCutOff_01.JPG
PiechartsCutOff_01.JPG (60.38 KiB) Viewed 162 times
Last edited by Ralf40670 on Fri Aug 02, 2019 8:36 am, edited 1 time in total.
Lech Kulikowski
Posts: 1863
Joined: Tue Mar 20, 2018 5:34 am

Re: Piecharts are cut off at the bottom

Post by Lech Kulikowski » Mon Jul 22, 2019 7:03 am

Hello,

We couldn't reproduce the issue.
Please send us a sample report with test data which reproduces the issue for analysis.

Thank you.
Ralf40670
Posts: 32
Joined: Wed Jul 17, 2019 5:08 pm

Re: Piecharts are cut off at the bottom

Post by Ralf40670 » Fri Aug 02, 2019 9:01 am

Hi Lech,

the screenshot that I initially attached was for winforms and not for web.
I have just added the correct screenshot which depicts the behavior I described in my posting.
The problem disappears under Windows 10 when a scaling of 125 % is used.

Regards
Ralf
Lech Kulikowski
Posts: 1863
Joined: Tue Mar 20, 2018 5:34 am

Re: Piecharts are cut off at the bottom

Post by Lech Kulikowski » Mon Aug 05, 2019 9:18 am

Hello,

We couldn't reproduce the issue.
Please send us a sample report with test data which reproduces the issue for analysis.

Thank you.
Ralf40670
Posts: 32
Joined: Wed Jul 17, 2019 5:08 pm

Re: Piecharts are cut off at the bottom

Post by Ralf40670 » Thu Sep 12, 2019 8:25 am

This works in Version 2019.3.5.
Lech Kulikowski
Posts: 1863
Joined: Tue Mar 20, 2018 5:34 am

Re: Piecharts are cut off at the bottom

Post by Lech Kulikowski » Thu Sep 12, 2019 9:00 am

Hello

We are always glad to help you!

Thank you.
Post Reply